"Is between angle" behaves strange

.CAPX

Try to move with mouse clockwise around "P" Sprite. The problem is: Why first stick stops rotating, even the angle limit is bigger than grey's?!!

I works ... but as sprite2 and 3 are tied to sprite.angle/2 (so same value for each) ... sprite begins to move sooner but sprite3 take the same angle/2 a little time after ... when sprite2 stop taking sprite.angle/2 sprite3 continue a little time to move so it works but you must really move slowly to seen any difference as angle range is short between Sprites are allowed moving and not.

THINK i have understand what you want to do (but i'm not sure)!

Try this : replace sprite2.angle formula by sprite2.rotate dt*100 clockwise and the same for sprite3 ! and then change in formulas *100 by other values depending on turn speed wanted. At last, use a variable to see if sprite.angle change when moving mouse and how ... and adjust conditions to only rotate spr2 and spr3 when spr.angle change and in "range" of angles.

I've renewed my CAPX, look again - I think the problem is that is between angles doesn't work correctly when angle is wider than 180 isn't it?

Yeah it doesn't work if the angle range > 180. Looks like a bug.

The angles above 180 are negative values. So north would be -90 northeast -45 and so forth up to -180. I saw before a math example to flip that around into how it should be but I can't seem to find it. Anyone know how to flip the negative value into a positive?

360 + negative angle = positive angle

360 - 90 = 270

And if you accumulate angle, e.g. 480, use modulo, e.g. 480%360